SMC Q2080-2 Sheet Molding Compound

Kaerda SMC Q2080-2 is a flame-retardant UL-94 V0 grade Sheet Molding Compound formulated with 21±2% glass fiber reinforcement. Engineered for commercial and hospitality sanitary environments requiring stringent fire safety, it delivers excellent moisture resistance, high arc resistance, and durable stain-resistant surface qualities.

Key Highlights: Glass Fiber Content: 21±2% | Density: 1.75-1.85 g/cm³ | Flame Retardancy: V0 | HDT: ≥200°C | Shrinkage: ≤0.12%

Key Technical Specifications

Property Test Standard Unit Value
Density GB/T1463 g/cm3 1.75-1.85
Water Absorption GB/T1462 mg ≤20
Shrinkage Rate GB/T15568 % ≤0.12
Glass Fiber Content GB/T15568 % 21±2
Heat Deflection Temperature (HDT) GB/T1634 ℃ ≥200
Tensile Strength GB/T1447 Mpa ≥40
Flexural Strength GB/T1449 Mpa ≥130
Impact Strength GB/T1451 KJ/㎡ ≥40
Limiting Oxygen Index GB/T 2406.2 % ≥33
Flame Retardancy UL-94 Grade V0

Product Features & Engineering Performance

  • Molding shrinkage ≤0.12%, low warpage after molding with high flatness and excellent assembly fitting performance.
  • Low water absorption and outstanding waterproof performance, resisting water absorption, delamination and blistering under long-term humid bathroom conditions.
  • Balanced mechanical properties, good foot-load and impact resistance, crack-resistant with long service life.
  • Heat deflection temperature ≥200℃, stable under continuous hot water exposure without softening.
  • UL-94 V0 flame retardancy improves fire safety of bathroom areas.
  • Uniform and dense substrate surface, suitable for painting, decorative paper hot-pressing and other post-processing.
  • Integral compression molding realizes complex curved shapes; lightweight, seamless structure to prevent water leakage.

Applications & Component Suitability

Suitable for prefabricated integrated bathrooms, hotels, apartments, homestays, modular cabins and residential projects. It can be manufactured into shower bases, bathroom wall panels, bathtubs, vanity substrates and bathroom storage housings. It meets comprehensive requirements of waterproofing, durability, easy cleaning and flame resistance for long-term wet-dry separated bathroom environments. A: Suitable for prefabricated integrated bathrooms, hotels, apartments, homestays, modular cabins and residential projects. Q: Can you adjust specifications based on project needs? A: Yes. The parameters shown on the page are representative references, and selected projects can be discussed for adaptation and development. Q: Can you provide samples for testing? A: Yes. Sample testing, TDS / MSDS requests, and early-stage technical evaluation are supported. Q: Do you support long-term bulk supply? A: Yes. The product is supported by real production lines and equipment, making it suitable for stable supply and long-term project cooperation. Q: Can you also support molded product development?

Manufacturing Infrastructure & Quality Control

Kaerda supports full-scale production from customized compounding to finished molded parts with ISO 9001 and IATF 16949 quality compliance:

  • 3 High-Capacity SMC Production Lines: Ensuring precise resin-to-fiber distribution and consistent lot-to-lot maturation.
  • 15 Compression Molding Presses (315T – 2500T): Capable of producing large-format, high-density composite enclosures and structural parts.
  • Integrated Testing Lab: Full testing for tensile/flexural strength, heat deflection temperature (HDT), shrinkage, and UL-94 flame retardancy.

Frequently Asked Questions

Suitable for prefabricated integrated bathrooms, hotels, apartments, homestays, modular cabins and residential projects. It can be manufactured into shower bases, bathroom wall panels, bathtubs, vanity substrates and bathroom storage housings. It meets comprehensive requirements of waterproofing, durability, easy cleaning and flame resistance for long-term wet-dry separated bathroom environments. A: Suitable for prefabricated integrated bathrooms, hotels, apartments, homestays, modular cabins and residential projects. Q: Can you adjust specifications based on project needs? A: Yes. The parameters shown on the page are representative references, and selected projects can be discussed for adaptation and development. Q: Can you provide samples for testing? A: Yes. Sample testing, TDS / MSDS requests, and early-stage technical evaluation are supported. Q: Do you support long-term bulk supply? A: Yes. The product is supported by real production lines and equipment, making it suitable for stable supply and long-term project cooperation. Q: Can you also support molded product development?

Yes. Kaerda operates an in-house polymer formulation lab and 3 automated SMC production lines. We can adjust glass fiber length and loading, cure kinetics, shrinkage control, and RAL color matching according to your tooling and mechanical requirements.

Absolutely. We provide full TDS/MSDS documentation and batch material samples for initial mold sampling, shrinkage validation, and mechanical testing.

Looking for OEM Custom SMC Formulations or Molded Parts?

Get direct engineering assistance from Kaerda on compound formulation, mold shrinkage calculations, and volume pricing.

about

Kaerda factory

Kaerda (Jiangsu Lantai) pioneers advanced composite materials like SMC, BMC, and Prepregs, delivering custom molded solutions and driving innovation across diverse industries.

Exploring Opportunities for the Global Expansion

become a partner

Main Products