SMC 6008P Sheet Molding Compound

Kaerda SMC 6008P is a premium high-strength Sheet Molding Compound with 30±2% glass fiber loading and a low shrinkage rate (≤0.1%). Specifically formulated for assembled modular FRP water tank panels, it provides high tensile strength (≥80 MPa) and impact resistance (≥80 kJ/m²) with zero leakage risk and excellent potable water safety.

Key Highlights: Glass Fiber Content: 30±2% | Density: 1.75-1.85 g/cm³ | Flame Retardancy: Non-FR | HDT: ≥200°C | Shrinkage: ≤0.1%

Key Technical Specifications

Property Test Standard Unit Value
Density GB/T1463 g/cm3 1.75-1.85
Water Absorption GB/T1462 mg ≤20
Shrinkage Rate GB/T15568 % ≤0.1
Glass Fiber Content GB/T15568 % 30±2
Heat Deflection Temperature (HDT) GB/T1634 ℃ ≥200
Tensile Strength GB/T1447 Mpa ≥80
Flexural Strength GB/T1449 Mpa ≥165
Impact Strength GB/T1451 KJ/㎡ ≥80

Product Features & Engineering Performance

  • Molding shrinkage ≤0.1%, low shrinkage and low warpage. Molded panels feature high flatness for good assembly tightness and lower leakage risk.
  • Ultra-low water absorption ensures stable dimension under long-term water immersion, resisting delamination and blistering for long service life.
  • 30% glass fiber content provides high tensile, flexural and impact strength, good hydraulic pressure resistance and creep resistance to withstand sustained water load.
  • Resistant to fresh water, weak acid and weak alkali; rust-free and inhibits moss growth to avoid secondary water pollution.
  • Heat deflection temperature ≥200℃, compatible with hot water tank molding process, suitable for cold and hot water storage.
  • Dense and smooth surface for easy cleaning. Uniform molded panels enable fast on-site assembly.
  • No flame retardant components. Formulation focuses on water resistance and high strength. Food-grade resin system is optional to meet domestic drinking water requirements.

Applications & Component Suitability

A:Mainly used for molded panels of assembled SMC FRP water tanks, including domestic drinking water tanks, fire cold water tanks, industrial water storage tanks, hot water insulated tanks and sewage intermediate tanks. Q: Can you adjust specifications based on project needs? A: Yes. The parameters shown on the page are representative references, and selected projects can be discussed for adaptation and development. Q: Can you provide samples for testing? A: Yes. Sample testing, TDS / MSDS requests, and early-stage technical evaluation are supported. Q: Do you support long-term bulk supply? A: Yes. The product is supported by real production lines and equipment, making it suitable for stable supply and long-term project cooperation. Q: Can you also support molded product development?

Manufacturing Infrastructure & Quality Control

Kaerda supports full-scale production from customized compounding to finished molded parts with ISO 9001 and IATF 16949 quality compliance:

  • 3 High-Capacity SMC Production Lines: Ensuring precise resin-to-fiber distribution and consistent lot-to-lot maturation.
  • 15 Compression Molding Presses (315T – 2500T): Capable of producing large-format, high-density composite enclosures and structural parts.
  • Integrated Testing Lab: Full testing for tensile/flexural strength, heat deflection temperature (HDT), shrinkage, and UL-94 flame retardancy.

Frequently Asked Questions

A:Mainly used for molded panels of assembled SMC FRP water tanks, including domestic drinking water tanks, fire cold water tanks, industrial water storage tanks, hot water insulated tanks and sewage intermediate tanks. Q: Can you adjust specifications based on project needs? A: Yes. The parameters shown on the page are representative references, and selected projects can be discussed for adaptation and development. Q: Can you provide samples for testing? A: Yes. Sample testing, TDS / MSDS requests, and early-stage technical evaluation are supported. Q: Do you support long-term bulk supply? A: Yes. The product is supported by real production lines and equipment, making it suitable for stable supply and long-term project cooperation. Q: Can you also support molded product development?

Yes. Kaerda operates an in-house polymer formulation lab and 3 automated SMC production lines. We can adjust glass fiber length and loading, cure kinetics, shrinkage control, and RAL color matching according to your tooling and mechanical requirements.

Absolutely. We provide full TDS/MSDS documentation and batch material samples for initial mold sampling, shrinkage validation, and mechanical testing.

Looking for OEM Custom SMC Formulations or Molded Parts?

Get direct engineering assistance from Kaerda on compound formulation, mold shrinkage calculations, and volume pricing.

about

Kaerda factory

Kaerda (Jiangsu Lantai) pioneers advanced composite materials like SMC, BMC, and Prepregs, delivering custom molded solutions and driving innovation across diverse industries.

Exploring Opportunities for the Global Expansion

become a partner

Main Products