SMC 6007P Sheet Molding Compound

Kaerda SMC 6007P is an industrial fan-grade Sheet Molding Compound with 23±2% glass fiber loading. Optimized for ventilation fan shrouds, impellers, and air-handling unit casings, it offers excellent resistance to moisture, chemical vapors, and thermal aging, ensuring long-term dynamic balance and low vibration.

Key Highlights: Glass Fiber Content: 23±2% | Density: 1.75-1.85 g/cm³ | Flame Retardancy: Non-FR | HDT: ≥200°C | Shrinkage: ≤0.12%

Key Technical Specifications

Property Test Standard Unit Value
Density GB/T1463 g/cm3 1.75-1.85
Water Absorption GB/T1462 mg ≤20
Shrinkage Rate GB/T15568 % ≤0.12
Glass Fiber Content GB/T15568 % 23±2
Heat Deflection Temperature (HDT) GB/T1634 ℃ ≥200
Tensile Strength GB/T1447 Mpa ≥50
Flexural Strength GB/T1449 Mpa ≥135
Impact Strength GB/T1451 KJ/㎡ ≥45

Product Features & Engineering Performance

  • · Molding shrinkage ≤0.12% delivers excellent dimensional stability, resisting deformation during long-term continuous operation and ensuring assembly precision and stable running.
  • · Low water absorption, good resistance to moisture, salt spray, weak acid and weak alkali. It avoids rusting compared with steel fans and fits corrosive working conditions.
  • · Balanced mechanical properties with good impact and fatigue resistance, crack-resistant under continuous airflow impact.
  • · Heat deflection temperature ≥200℃, favorable heat resistance to withstand temperature rise during fan operation.
  • · Formulation focuses on anti-corrosion performance; lighter weight and better vibration & noise reduction than metal.
  • · Integral compression molding enables streamlined curved structure with smooth surface and low wind resistance.
  • · Surface coating modification can be carried out as required to adapt to various industrial ventilation environments.

Applications & Component Suitability

A:Mainly applied to industrial anti-corrosion ventilation fields without mandatory fire protection requirements. Suitable for anti-corrosion axial fans, centrifugal fans, roof ventilators and duct fans in chemical workshops, electroplating factories, sewage treatment plants, breeding farms and laboratories. Q: Can you adjust specifications based on project needs? A: Yes. The parameters shown on the page are representative references, and selected projects can be discussed for adaptation and development. Q: Can you provide samples for testing? A: Yes. Sample testing, TDS / MSDS requests, and early-stage technical evaluation are supported. Q: Do you support long-term bulk supply? A: Yes. The product is supported by real production lines and equipment, making it suitable for stable supply and long-term project cooperation. Q: Can you also support molded product development?

Manufacturing Infrastructure & Quality Control

Kaerda supports full-scale production from customized compounding to finished molded parts with ISO 9001 and IATF 16949 quality compliance:

  • 3 High-Capacity SMC Production Lines: Ensuring precise resin-to-fiber distribution and consistent lot-to-lot maturation.
  • 15 Compression Molding Presses (315T – 2500T): Capable of producing large-format, high-density composite enclosures and structural parts.
  • Integrated Testing Lab: Full testing for tensile/flexural strength, heat deflection temperature (HDT), shrinkage, and UL-94 flame retardancy.

Frequently Asked Questions

A:Mainly applied to industrial anti-corrosion ventilation fields without mandatory fire protection requirements. Suitable for anti-corrosion axial fans, centrifugal fans, roof ventilators and duct fans in chemical workshops, electroplating factories, sewage treatment plants, breeding farms and laboratories. Q: Can you adjust specifications based on project needs? A: Yes. The parameters shown on the page are representative references, and selected projects can be discussed for adaptation and development. Q: Can you provide samples for testing? A: Yes. Sample testing, TDS / MSDS requests, and early-stage technical evaluation are supported. Q: Do you support long-term bulk supply? A: Yes. The product is supported by real production lines and equipment, making it suitable for stable supply and long-term project cooperation. Q: Can you also support molded product development?

Yes. Kaerda operates an in-house polymer formulation lab and 3 automated SMC production lines. We can adjust glass fiber length and loading, cure kinetics, shrinkage control, and RAL color matching according to your tooling and mechanical requirements.

Absolutely. We provide full TDS/MSDS documentation and batch material samples for initial mold sampling, shrinkage validation, and mechanical testing.

Looking for OEM Custom SMC Formulations or Molded Parts?

Get direct engineering assistance from Kaerda on compound formulation, mold shrinkage calculations, and volume pricing.

about

Kaerda factory

Kaerda (Jiangsu Lantai) pioneers advanced composite materials like SMC, BMC, and Prepregs, delivering custom molded solutions and driving innovation across diverse industries.

Exploring Opportunities for the Global Expansion

become a partner

Main Products